Features
Wet/Submerged Application
Impulse™ Pumps can be used for a variety of fully submerged applications including aquariums, sumps, and outdoor or indoor ponds.
Dry/Inline Application
They can also be used for dry or inline applications including skimmers, reactors, and sumps. Use one of the included multi-size hose adapter fittings for quick and easy connections.
Flow Regulation
Use flow regulation to adjust the flow to the ideal rate for your particular application. Adjustments up to 400, 600, and 800 GPH respectively.
Wear-Resistant Impeller
The Impulse™ is equipped with a synchronous motor, advanced impeller, and ceramic shaft and bearings.
Technical Specifications
Impulse 400
Max Flow Rate
400 GPH / 1.500 l/h
Watts
23 – (120 v – 60 Hz)
23 – (230 v – 50 Hz)
Amperes
0.43 A / 0,17 A
Head Max
6 ft / 1,8 m
Cord Length
7.5 ft / 2,28 m
Hose Connector
1/2″ GAS / 15-20 mm
Impeller Shaft
Stainless Steel
Impulse 600
Max Flow Rate
600 GPH / 2.200 l/h
Watts
35 – (120 v – 60 Hz)
32 – (230 v – 50 Hz)
Amperes
0.65 A / 0,30 A
Head Max
6.5 ft / 2 m
Cord Length
7.5 ft / 2,28 m
Hose Connector
3/4″ GAS / 21-26 mm
Impeller Shaft
Ceramic
Impulse 800
Max Flow Rate
800 GPH / 3.000 l/h
Watts
48 – (120 v – 60 Hz)
45 – (230 v – 50 Hz)
Amperes
0.43 A / 0,21 A
Head Max
9.9 ft / 3 m
Cord Length
7.5 ft / 2,28 m
Hose Connector
3/4″ GAS / 21-26 mm
Impeller Shaft
Ceramic
Head Ratings
Pump head measures the vertical distance a pump can effectively move water. As the height increases, water pressure decreases because the water must travel a longer distance. Measure the distance water will travel on your setup (e.g. the distance between your sump and aquarium) to determine the right Impulse™ for you.